top of page

Load data for 7.62 x 39 (M43) Russian + .313 | 90gr | H&N WC

Recommended Powder(s): Hodgdon LilGun

7.62 x 39 (M43) Russian + .313 | 90gr | H&N WC

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.313 | 90gr | H&N WC
Bullet Weight:
90gr | 5.8g
Bullet Diameter:
0.313" | 7.95mm
Bullet Length:
0.547" | 13.9mm
Caliber:
7.62 x 39 (M43) Russian load data
Case Length (l3):
1.523" | 38.7mm
Cartridge Length (C.O.L.):
1.523" | 38.7mm
Seated Depth:
0.547" | 13.9mm
Shank Seated Depth:
0.350" | 8.9mm
Case Capacity:
35.5 Grains of Water | 2.31 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
51488 psi | 3550 bar
LID:
LID_B7418_C1119
Last updated:
2025-11-10

Load data for 20 loads in caliber 7.62 x 39 (M43) Russian with .313 | 90gr | H&N WC bullet and 10 powders such as Hodgdon LilGun. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
97%
42656
83%
**98
97%
[Accurate 5744]*
<<locked>>
97%
46180
90%
**33
92%
Accurate No. 11 FS
<<locked>>
96%
43468
84%
**90
96%
Hodgdon LilGun 👍
<<locked>>
94%
44440
86%
**25
100%
[Lovex D063]*
<<locked>>
95%
46282
90%
**07
92%
Lovex S040
<<locked>>
92%
45687
89%
**84
100%
[Lovex S053]*
<<locked>>
96%
28442
55%
**25
93%
SNPE Vectan BA6 1/2
<<locked>>
96%
26571
52%
**26
99%
[Shooters World Blackout]*
<<locked>>
95%
46282
90%
**07
92%
Vihtavuori N110
<<locked>>
96%
33707
65%
**59
100%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
[ADI AR 2205]*
<<locked>>
81%
25135
49%
**31
91%
[Accurate 5744]*
<<locked>>
93%
40698
79%
**35
90%
[Accurate No. 11 FS]*
<<locked>>
85%
29153
57%
**08
91%
Hodgdon LilGun
<<locked>>
81%
26194
51%
**80
98%
[Lovex D063]*
<<locked>>
92%
40596
79%
**12
90%
Lovex S040
<<locked>>
81%
31604
61%
**31
98%
[Lovex S053]*
<<locked>>
91%
23699
46%
**97
90%
[SNPE Vectan BA6 1/2]*
<<locked>>
81%
16694
32%
**14
94%
[Shooters World Blackout]*
<<locked>>
92%
40596
79%
**12
90%
Vihtavuori N110
<<locked>>
81%
20465
40%
**21
95%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page